DESCRIPTION :
- Does not tend to peel or delaminate old lead based coatings.
- Single component, moisture cure urethane.
- Very resistant to thermal shock, recommended for extremely cold environments, down to 60° F.
- Proprietary blend of corrosion inhibitor, aluminium & micaceous oxide.
- Colour: Brown
- Designed specifically to solve the peeling and delamination problems found in epoxy mastic when used to overcoat old coatings.
|
| |
USES:
- This product is designed to overcoat old coating including oil based red lead, vinyl red lead, alkyd, phenolic and most old coatings.
- Spot prime bar steel with AR - MIO Zinc.
- This product is not recommended direct to metal.
|
| |
| TECHNICAL DATA : |
| |
| Solids by volume |
: |
61.0 + 2.0 % |
| Weight / Ltr |
: |
1.90 + 0.4 Kg / Ltr |
| Pigment type |
: |
Aluminium and Tar of special grade. |
| Flash Point |
: |
Above 40° C |
| Theoretical coverage |
: |
7 m2 / Ltr @75 microns DFT |
| Recommended Dry film thickness |
: |
75 microns |
| Temperature resistance (Dry ) |
: |
145° c continuous and 175° C intermittent |
| Curing time @ 25° C |
: |
Touch- 30 min; Handle-8 hours; Recoat- 4hours; Stack - 10 hours. |
| Recoatability |
: |
Tack free ( this is normally in 4 hours ) |
| Colour |
: |
Aluminium |
| Finish |
: |
Matt |
| Shelf life |
: |
12 Months in an unopened original container. |
| |
ADVANTAGES :
- Single component - no catalyst mixing errors.
- Can be applied in cold, damp conditions - humidities to 99 %.
- Can be applied at low temperatures to low freezing. Avoid frozen surfaces.
- Can be immersed with in 1- 2 hours.
- Does not weaken the adhesion of old coatings.
|
| |
Aster Infotech